header-langage
简体中文
繁體中文
English
Tiếng Việt
Scan to Download the APP
Partnered With:

Must read: A quick overview of 50+ cryptocurrency quantitative analysis metrics

Read this article in 12 Minutes
For many coins, it is difficult or almost impossible to directly calculate on-chain transactions.
原文标题:《 收藏!一文了解 50+加密货币定量分析指标 》
原文来源: Apatheticco,Defi之道


In a previous article, we briefly introduced several indicators widely used in the industry, namely the "Four Big Kings" of quantitative analysis, including price, trading volume, supply and market value. In this article we will add more data to introduce more indicators.


1. On-chain data


, & have spent Trading volume (24 hours, USD)


Tx Vol (24HR, USD) refers to the sum of all transaction outputs generated by the block on a given date, ignoring the known "change" output. Note that for Ripple and Stellar, transaction volume refers only to the value of XRP and XLM where the transfer occurred.


, & have spent Adjusted Trading volume (24 hours, USD)


This is an estimated amount of on-chain trading in dollars over the past 24 hours, adjusted to remove certain types of "non-economic" transactions.


, & have spent Median Transaction Volume


This is the value of the median trade in the last 24 hours. The median transaction value may be 0 -- occurs when more than half of the transactions on the chain in a given day do not transfer value (the value of the transfer is 0). This can easily happen with smart contract chains that don't focus on economic value transfer (i.e., payment).


, & have spent NVT Ratio


The NVT ratio is the ratio of the current network value (that is, the current market capitalization) to the estimated daily on-chain volume. For the volume portion of the NVT, we use daily averages over 7 days to eliminate occasional, very short-term, peak volume fluctuations. An NVT essentially tries to describe how much value the market actually assigns to the actual direct use of an asset. Thus, NVT is described as the "PE" of a crypto asset (the stock market price-earnings ratio, where the price per share is divided by earnings per share).


However, there are a few caveats about NVT:


1) For many coins, it is very difficult or almost impossible to directly calculate on-chain transactions. For blockchains based on the UTXO account model, such as Bitcoin and its forked coins, it is often difficult or impossible to figure out how much * spent * in a transaction and how much "change" is returned to the sender of the transaction. Account model-based tokens, such as Ethereum and Ethereum Classic, do not have this problem. Transactions in currencies like Bitcoin are overestimated, but probably not in the ethereum class. Note that the NVT (and transaction volume) sizes are not comparable between tokens of different transaction types!


2) According to Coin Metrics, trading volume is "the sum of the output of all transactions in the block generated on a given date," and no attempt is made to identify the amount of "change" because there is no way to actually determine what is change and what is not. While this approach won't tell you the "real" usage (obviously, it overestimates the actual cost), it does provide a "pure" measure that doesn't rely on any assumptions. So these numbers are likely (but not guaranteed!) There is comparability between cryptocurrencies for similar types of transactions.


, & have spent Active Address


This is the number of unique addresses that have participated in a transaction at any point in the past 24 hours. Note that for Monero coins, CoinMetrics notes that this metric can only report "the upper limit of the data (the sum of the input and output counts), and covert address technology prevents precise values from being available."


, & have spent Transactions 24H


This is the number of transactions that took place in the past 24 hours and does not include the issuance of new currency.


, & have spent Payments 24H


This is the number of transactions that have transferred value in the last 24 hours.


, & have spent New Issue (New Hk $20BN)


This is the dollar value of newly issued tokens in the last 24 hours.


, & have spent Transaction Fee (24 hours, US $)


This is the dollar value of the transaction fee generated in the last 24 hours.


, & have spent Median transaction cost (US $)


This is the dollar value of the median transaction fee over the past 24 hours.


, & have spent The average difficulty


This is the average online mining difficulty over the last 24 hours.


, & have spent Kilobytes added (24H)


This is the size (in kilobytes (KB)) of data added to the chain in the last 24 hours.


, & have spent Number of blocks (24 h)


This is the number of blocks added to the chain in the last 24 hours.


2. The consensus


, & have spent Targeted Block Time


This is the target time interval (in seconds) between two blocks, defined by the specification of a given crypto asset. The actual observable block out time may differ slightly from this value.


, & have spent Block Reward


A block reward is a newly minted token that is awarded to the creator of a new block and does not include transaction fees that are also awarded to the creator of a new block.


, & have spent Annualized Staking Yield


That's an annualized yield on Staking at current levels of supply.


, & have spent Real Annualized Staking Yield


The real rate of return is the expected annual rate of return after considering the increase of flow supply of the network, and adjusts the nominal pledge rate of return according to the inflation rate of flow supply.


, & have spent The amount of tokens pledged


This is the number of tokens currently pledged on the network.


, & have spent % Network Staking


This is the current number of pledged tokens as a percentage of the current reported supply.


, & have spent Staking Minimum


This is the minimum number of tokens required or recommended for the pledge.


3. Mining data


, & have spent Hash Rate


This is the power of the Internet at last. Note that from a security point of view, the computational power of tokens using different algorithms is not comparable, as different algorithms may require significantly different computing resources per hash.


, & have spent Percentage on Nicehash (% on Nicehash)


This is the computing power that is currently available for rent on NiceHash and can be used to launch a 51% attack. NiceHash is a crypto mining computing market where users can buy and sell mining computing. For some tokens, it is theoretically possible to rent enough computing power on NiceHash to launch a 51% attack on the token. For other tokens, only a small amount of computing power is available on NiceHash. This indicator can be well below 100% (in which case there is not enough computing power on NiceHash to rent for a 51% attack) or well above 100% (in which case there is enough computing power to rent).


, & have spent Attack cost (1H)


This is now the (theoretical) cost of renting enough computing power on NiceHash for a 51% attack lasting one hour.


, & have spent Attack cost (24H)


This is now the theoretical cost of renting enough computing power on NiceHash for a 51% attack that lasts a day. Note that this metric is only used to get a rough idea of the potential costs. There is considerable volatility in the NiceHash market, and the act of conducting an attack can have a significant impact on the computing market itself.


, & have spent Next Halving Date


This is an estimate of the next halving (block reward halving) of PoW crypto assets, based on the average block time observed over the past six months.


4. All Time High & Cycle Low)


In calculating the all-time high, we ignore the first 10 days of a trade. This is because the first few days of asset trading are usually unusually volatile; As a result, any ATH generated during this period has almost no valid price signal.


The ATH offer is not necessarily the absolute highest single deal price. When analyzing historical data, it is not always possible to look at every transaction of an asset. For some assets, ATH may refer to the daily average of the all-time high, or a sample of prices on the day the all-time high occurred.


, & have spent ATH (US $)


That's the highest price the asset has ever traded at, in dollar terms.


, & have spent Time from ATH


This is the number of days since the asset reached an all-time trading price (relative to the dollar).


, & have spent % Down from ATH


That's how far the asset has fallen from its all-time high (in dollar terms). For example, if the asset's all-time high was $120 and is currently trading at $80, it is down 33% from the ATH. Note that when assets hit record highs, this indicator will be "0%".


, & have spent Breakeven Multiple


This is the multiple that the current price would have to rise to regain its all-time high. Note that this is * multiples *, not percentages. For example, if the asset peaked at $120 and is currently trading at $15, the break-even multiple would be 8 times. In other words, the asset would have to earn 8 times to return to its previous all-time high.


, & have spent Cycle low (USD)


This is the lowest trading price (in dollar terms) for the asset since it hit a record high. Please note that the cycle low quote is not necessarily the absolute lowest single deal price.


, & have spent Time Since Low


This is the number of days since the asset reached its cycle low trading price (relative to the DOLLAR).


, & have spent It has risen by % Since Low.


This is how much the asset has risen from its cycle low (in dollars). For example, if the asset peaked at $120 and then traded at $15, but now trades at $25, the percentage increase from its low price would be 66.7%.


, & have spent Short-term ROI


Return on investment is the percentage return on an asset over a specified period of time.


, & have spent ROI by Year


Return on investment by year is the percentage return on an asset from the beginning to the end of a given year


5. Risk indicators


Volatility is defined as the annualized standard deviation of daily returns. The Sharpe Ratio represents The extra return an investor gets for every extra unit of risk he takes. If you earn more excess return than risk, the Sharpe ratio will be positive. Similarly, if you have negative excess returns or positive returns with high volatility, your Sharpe ratio will be negative.


6. Project launch


, & have spent Initial Supply


This is the initial number of tokens issued when the asset is launched.


, & have spent % Initial Supply -- Investors


This is the number of tokens allocated to the initial investor as a percentage of the total initial supply at the time the asset is launched.


, & have spent % Initial Supply - Pre-mine & Airdrops


This is the percentage of the total initial supply of tokens airdropped or reserved for future block awards at asset startup.


, & have spent % Initial Supply - Organizations & Founders


This is the number of tokens allocated to the founder or project operation (the organization behind the project) as a percentage of the initial supply at the time the asset is launched.


7. Token sales statistics


TokenData lists and provides data on past, current, and upcoming ICOs and token sales.


, & have spent The money that is obtained from Token Sale


This is the amount raised during the ICO/ initial sale of the project. The sales amount includes the amount raised in all currencies (legal tender and cryptocurrency).


, & have spent Sales start date


This is the start date of the ICO/ first sale of the project.


, & have spent End of sale date


This is the date the project's ICO/ first sale ends.


8. Making data


Note that there are often many repositories associated with a given asset or project, but the Github statistics shown on Messari are extracted from the asset's "primary" repository. Sometimes it is not simple to determine which repository should be considered the primary repository. In this case, we choose the repository (REPo) that best defines the unique characteristics of the project. This is typically a repository that defines the asset core node client, or a set of smart contracts. Note that in some cases, this means that we do not report statistics on the most popular repositories in the project. This is because it sometimes happens, for example, that a project's wallet repository or helper-SDK has more Star/Watch/ activities than the core node or contract repo.


, & have spent Stars


This is the number of stars owned by the asset's primary Github repository.


, & have spent Watches


This is the number of observers that the asset's primary Github repository has.


, & have spent Commits (90D)


This is the number of commits to the asset's main Github repository in the last 90 days.


, & have spent Commits (1Y)


This is the number of commits to the asset master Github repository in the past year.


, & have spent Lines Added(90D)


This is the number of lines of code committed to the asset's primary Github repository in the last 90 days.


, & have spent Lines Added (1Y)


This is the number of lines of code committed to the asset's primary Github repository over the past year.


, & have spent Lines Removed (90D)


This is the number of lines of code removed from the asset's main Github repository in the past 90 days.


, & have spent Lines Removed (1Y)


This is the number of lines of code removed from the asset's primary Github repository in the past year.


9. Other


, & have spent Vladimir Club Cost


A Vladimir Club is owning 1% of 1% of the final supply of an asset. For example, the supply of Bitcoins is fixed at 21,000,000. Therefore, to join bitcoin's "Vladimir Club" you need: 21,000,000 * 0.01 * 0.01 = 2,100 BTC. The term "Vladimir Club" was coined by Vladimir on the Bitcointalk forum in 2011 or 2012 and has since become a very convenient metric to compare the cost difference of owning 1% of different crypto assets. Messari uses Y2050 supply as the "final supply".


, & have spent Price if BTC-Normalized Supply


This is the price of the asset if it had the same supply as the current bitcoin. We first saw @BoxMining publish this indicator on January 4, 2018. The exact calculation used by OnChainFX is simple: the current market value of the asset divided by the current supply of Bitcoin. As with all types of market cap comparisons, we hope this framework will help people better understand how markets price assets.


Price if BTC-Normalized to Y2050 Supply


We first saw this indicator from @BoxMining on January 4, 2018. The math is simple: The current market value of the asset divided by the Y2050 supply of Bitcoin.


, & have spent Age


This is the age of the asset relative to when it was tradable. For a proof-of-work issued asset such as Bitcoin, this is synonymous with the timestamp on the Genesis block (i.e., the time when the first block was mined). However, for some ICO assets, tokens can be traded before the network is started.


, & have spent Genesis Block Date


This is the date of genesis block (i.e. when the first block was mined).


, & have spent Have you experienced 51% of attacks?


This indicates whether crypto assets have experienced 51% attacks since launch. A 51% attack is when a person or group gains more than half of a blockchain resource (computing power in PoW, tokens in PoS) in order to reverse a transaction.


The original link


Welcome to join the official BlockBeats community:

Telegram Subscription Group: https://t.me/theblockbeats

Telegram Discussion Group: https://t.me/BlockBeats_App

Official Twitter Account: https://twitter.com/BlockBeatsAsia

举报 Correction/Report
Choose Library
Add Library
Cancel
Finish
Add Library
Visible to myself only
Public
Save
Correction/Report
Submit